Products Cubicles Soft Bed HT 8GS WINGS & HT 4GS WINGS

Soft Bed HT 8GS WINGS & HT 4GS WINGS

Cover sheet
The HT soft beds of the WINGS series offer the greatest softness and perfect lying comfort. The solid rubber profile in the upper and lower area ensures optimal sealing of the foam substructure packed in plastic. This combination guarantees years of durability without wear. The cover sheet with extra strong fabric is 4 or 8 mm thick. It has a slight slope so that puddles do not form in the rear area. Liquids run off without penetrating the substructure.

Foam substructure / spring deflection (packed in foil)
The foam substructure consists of either 30 mm or 40 mm thick composite foam panels wrapped in foil. This ensures optimal spring deflection, which is 100% waterproof. Due to the solid rubber profile in the upper and lower area a perfect fixation of the foam panels is achieved. The compression hardness is designed for high point loads by dairy cows. This ensures that the carpet pad remains dimensionally stable and dry for many years.

Cows stand and lie safely on HT soft beds, which is easy on the joints. The HT soft beds of the WINGS series can extend the lying time of the animals and thus increase performance.
All Huber Technik stable coverings are PAH neutral and DIN compliant. They are laid on level floors (concrete). The installation of the roll material is simple and time-saving. Please read the installation instructions.

Pictures

Technical Data
Soft Bed HT 8GS WINGS & HT 4GS WINGS

Comfortlevel

5 von 5

Application area

High stalls for dairy cattle and young cattle

Suitability

New construction and renovation

Thickness

4GS WINGS:

Top sheet: 4 mm (weight: 8.4 kg/sqm)
Head/foot area: 19 mm solid rubber profile
Composite foam: optionally 30 mm or 40 mm
Total: 34 mm or 44 mm


8GS WINGS:

Top sheet: 8 mm (weight: 12.1 kg/sqm)
Head/foot area: 23 mm solid rubber profile
Composite foam: optionally 30 mm or 40 mm
Total: 38 mm or 48 mm

Dimensions

Length: 10 m to 35 m
Width: 1.80 m

Profile

Top side: hammered profile
Underside: smooth, reinforced with extra strong fabric
Substructure: 30 mm or 40 mm composite foam wrapped in foil

Penetration depth

4GS WINGS:
19.8 mm according to DLG test method with 30 mm composite foam


8GS WINGS:
25.3 mm according to DLG test method with 40 mm composite foam

Special features

+ Fast drainage of liquids
+ Particularly tear-resistant
+ Reinforced and stable tread

Installation

Rolls + Composite foam sheets

Warranty

10 years on the complete system

Compare
Softbed HT 4GS

Soft Bed HT 4GS

Soft Bed HT 8GS

Back to the top